Gamma Spectroscopy

Introduction

The GammaPro 1410 is a digital gamma spectrometer uniquely designed for gamma-ray detectionapplications.
It is compatible with essentially all the 10-stage photomultiplier tubes PMTs) that fitstandard 14 pin tube sockets.
The GammaPro 1410 consists of miniaturized preamplifier, low ripple high voltage supplier, digital MCA with a 32bit RISC microprocessor and power over Ethernet(PoE) interface. All the features combined make it easy for the GammaPro 1410 to be connected into a network via Ethernet so that remote & large area monitoring applications become flawless.
Furthermore, the GammaPro 1410 includes 'NuFocus' software for complete quantitative analysisand detector control.

Key features

• Digital gamma spectrometer for 10-stage PMTs with 14-pin socket
• Plug-in & Play by self-powered PoE (Power of Ethernet)
• Integrated RJ-45 Ethernet interface for maximum throughput
• High voltage control for optimum dynamic range performance
• Supplementary analog anode output for timing applications
• Digital MCA and MCA software for quantitative analysis

Applications

• Remote monitoring of multiple detectors in network
• Large area environmental monitoring
• Gamma ray spectroscopy
• Nuclear waste or cargo container inspection
• Homeland security
• Teaching and research

Plug-in & Play & Auto calibration

Installation is simple using the Ethernet interface of the PC. Once network connection is establishedusing the NuFocus software, the detectors are automatically identified and able to begin makingmeasurementTo ensure that GammaPro1410 is always operated with an accurate energy calibration, a simpleauto-calibrate feature allows the user to check/align energy calibration at any time.

Specifications

	DigitalMCA	32 bit RISC, ARM CortexTM-M3
	Conversion	data 12 bit (65 Msps)
	Data buffer	54kbyte
	Input Power	PoE compliant to 802 3af
	network	RJ-45 Ethernet
	Dimensions	63 mm diameter x 135 mm length
	Weight	330g

Standard Performance

Detector control and data analysis

The NuFocus provides a graphical user interface for two main features.
- Detector control features includes detector identification, TCP/IP setup, acquisition control, detector reset, gain control and etc.
- Quantitative data processing features
includes spectrum generation, peak detection, energy calibration, file processing, isotope library management, DAQ status monitoring and more.
The NuFocus, detector control and spectrum analysis software, makes installation and data processing simple!

Optional model

- GammaPro^TM1410A
GammaPro^TM1410A is an optional model which is powered by a DC adaptor instead of PoE.
The model is suitable for applications where users prefer not to use a PoE hub.